Submersible wires

Flat Submersible Wires

APPLICATION:

Pump connections are the primary use for the PVC insulated and sheathed 3 Core Flat Cables. They are employed in numerous industrial applications as well. The sheath is specifically designed to withstand demanding and challenging conditions of use, with exceptional water resistance and conditional oil and grease resistance.

CONDUCTOR:

Electrolytic grade annealed copper

MARKING:

KVVS WIRES AND CABLES is a generic marking put on the cables.

COLOUR:

Red, Yellow (center core), Blue

PACKING:

Standard packaging: 500 mtr wooden drums, 300 mtr coils. Longer lengths can be requested.

Three Core Flat PVC Insulated Copper Conductor Cable for Submersible use, 1100 Volt and IS 694 : 2010.

Nominal Cross Sectional Area of Conductor	Nos/Nom. Dia of Conductor Strands	Nom. Thickness of Insulation	Nom. Thickness of Sheath	SHEATH Approx Overall Dimension		Current Carrying Capacity at 40°C	Maximum Conductor Resistance @ 20 °C
				Width (W) (Nom)	Width (W) (Nom)
mm²	Nos/mm#	mm	mm	mm	mm	Amps	Ohm/kM
1	32/0.2	0.6	0.9	9.4	4.4	14	19.50
1.5	30/0.25	0.6	0.9	10.1	4.6	16	13.30
2.5	50/0.25	0.7	1.0	12.2	5.5	22	7.98
4	56/0.3	0.8	1.0	14.5	6.4	29	4.95
6	84/0.3	0.8	1.1	16.2	7.0	37	3.30
10	140/0.3	1.0	1.4	20.5	8.5	51	1.91
16	126/0.4	1.0	1.4	23.5	9.8	68	1.21
25	196/0.4	1.2	3.5	28.8	11.8	86	0.780
35	276/0.4	1.2	2.0	32.5	13.1	110	0.554

Note:

As per IS 3961 (PART V) - 1968. The number & diameter of conductor strands are for reference only and governed by conductor resistance. The above data is indicative only and may be revised without prior information. KVVS will not be responsible for any damages arising out of incorrect application of its proudct.
As per conductor class 5 of IS 8130 : 2013.

Domestic Wires